820-type color steel roll forming machine
Parameters of 820-type color steel tile press machine:
Equipment dimensions:
The general installation dimensions of the equipment are 6000mm×1400mm×1200mm.
Equipment weight:
The total weight of the equipment is approximately 2500kg.
Feeding parameters:
Feeding plate thickness: The thickness of color steel plates that can usually be processed is between 0.25mm and 0.8mm.
Feeding width: The feeding width is 1000mm.
Forming parameters:
Number of forming passes: 13 rows.
Effective coverage area: The effective coverage area of color steel tiles produced by this model of tile press machine is 820mm.
Equipment dimensions:
The general installation dimensions of the equipment are 6000mm×1400mm×1200mm.
Equipment weight:
The total weight of the equipment is approximately 2500kg.
Feeding parameters:
Feeding plate thickness: The thickness of color steel plates that can usually be processed is between 0.25mm and 0.8mm.
Feeding width: The feeding width is 1000mm.
Forming parameters:
Number of forming passes: 13 rows.
Effective coverage area: The effective coverage area of color steel tiles produced by this model of tile press machine is 820mm.
The transmission mode of the 820-type color steel roll forming machine is chain, with a specification of 1 inch.
Power parameters:
Host power: The host power is generally 3kw.
Hydraulic shearing power: The power of the hydraulic shearing part is 3kw.
Speed parameters:
Working speed: The working speed per minute is about 8 to 10 meters.
Pressure parameters:
Hydraulic station pressure: The pressure of the hydraulic station is usually between 10MPa and 12MPa.
Roller and other component materials:
Roller material: Mostly 45# steel with hard chromium plating on the surface, and the hardness can reach HR55°-57°. This material can ensure the wear resistance and service life of the roller.
Shaft material: High-quality 45# steel and undergoes heat treatment to ensure the strength and rigidity of the shaft.
Tool material: For example, CR12 die steel is used. After quenching treatment, the hardness can reach HRC58-60 to ensure the cutting accuracy and efficiency.
Host power: The host power is generally 3kw.
Hydraulic shearing power: The power of the hydraulic shearing part is 3kw.
Speed parameters:
Working speed: The working speed per minute is about 8 to 10 meters.
Pressure parameters:
Hydraulic station pressure: The pressure of the hydraulic station is usually between 10MPa and 12MPa.
Roller and other component materials:
Roller material: Mostly 45# steel with hard chromium plating on the surface, and the hardness can reach HR55°-57°. This material can ensure the wear resistance and service life of the roller.
Shaft material: High-quality 45# steel and undergoes heat treatment to ensure the strength and rigidity of the shaft.
Tool material: For example, CR12 die steel is used. After quenching treatment, the hardness can reach HRC58-60 to ensure the cutting accuracy and efficiency.